Description of application and parameters
Application program
24
NOTE
If the type of output is changed, also the options for setting the parameters
change.
■
Value for switching on
■
Value for switching off
In this manual only values for the 1-bit setting are described.
Options:
Switching on/off
Activation
Deactivation
–
Switch-on/switch-off
: sends a telegram at the start of movement and at the end of switch-off
delay.
–
Switch-on
: only sends a telegram at the start of movement.
–
Switch-off
: only sends a telegram at the end of switch-off delay.
NOTE
If switch-on or switch-off has been selected, the following parameters are not
displayed:
■
Value for switching on (not for switching off)
■
Value for switching on, cyclic sending (not for switching off)
■
Value for switching off (not for switching on)
■
Value for switching off, cyclic sending (not for switching on)
Options:
On
Off
–
On
: When the detector detects movement, value 1 is sent via the bus.
–
Off
: When the detector detects movement, value 0 is sent via the bus.
Options:
No
Yes
–
No
: The set value is sent only once via the bus.
–
Yes
: The set value is sent cyclic via the bus.
– Parameter "cyclic repeat time" is also displayed.
