Description of application and parameters
Application program
38
NOTE
This parameter is only visible if the "Use of enable detector object" parameter is
set on "Yes".
Options:
Enabled
Blocked
■
Enabled
: The device is enabled and functions normally when the bus voltage is interrupted
or the device has been re-programmed, as well as after a reset.
■
Blocked
: The device is blocked and must be enabled for normal function when the bus
voltage is interrupted or the device has been re-programmed, as well as after a reset.
NOTE
This parameter is only visible if the "Use of enable detector object" parameter is
set on "Yes".
Options:
No telegram
Current status
Single value for switching on
Single value for switching off
–
No telegram
: No telegram is sent during enable.
–
Current status
: During enable the detector checks whether a movement has occurred and
the brightness is below the brightness-value threshold. If yes, the single value for switch-on
is sent. Otherwise the single value for switch-off is sent.
–
Single value for switch-on
: During enable the single value which has been parameterized
under the value for switch-on parameter is sent.
–
Single value for switch-off
: During enable the single value which has been parameterized
under the value for switch-off parameter is sent.
