Description of application and parameters
Application program
26
Options:
1 .. 1000
– The brightness-value threshold is used to specify the lighting intensity at which the detector
is to start to respond. If the detector does not switch on and the measured brightness lies
above the set threshold, no telegram is sent during movement.
Options:
No
Yes
–
No
: Only the most important parameters for setting the detector are displayed.
–
Yes
: All parameters are displayed, also those that are not required in most cases.
■
Extended parameter settings
■
Status display parameter
■
Brightness parameter
■
External button parameter
■
Sensor selection parameter
■
Enable
NOTE
The following parameters are visible only when parameter "Fade in extended
parameters" is set on "Yes".
