Contrec 515 BR03, Operation Manual, Page: 96 / 110

Communications
86 515 BR03 - 15 August 2021
Individual Log Data
When in the Log Menu and while holding the DISPLAY key to view the
data of the log of interest, the RESET key can be pressed to initiate a
printout of that log entry. The printout will have the time and date stamp
corresponding to when the log was taken. After the print has been initiated
there will be the opportunity to scroll to view another log entry and print
again.
Since each log entry stores the delivery totals only, the printout will not have
any accumulated totals. The format of the printout with this exception is the
same as the LIVE DATA printout:
Custom Header Lines
Instrument Serial No. & Tag
Logged Delivery No. number
Date & Time & Status
Variable unit
value
Variable unit value
etc.
Custom Footer Lines
-------------------------------------------- <separation line>
Log Report Printing
As there is the likelihood that the reports can be of a considerable length it
is strongly recommended that only the 80 Column printer with Z fold
(tractor feed) paper be used. This is just as much for the memory storage of
printer as it is for the reliable paper supply.
There is a HOLD.SET REPORT PRINT prompt under the main menu with
the ability to print the pre-selected type of report. Pressing and holding the
SET key for two seconds will initiate the printout. Any of the Log Reports
will have the following format:
Custom Header Lines
Title of Report <internally set, indicates report type>
Current Date & Time
Instrument Serial No. & Tag
-------------------------------------------- <separation line>