12
W415-0318 / 03.05.09
3.2 LOG
PLACEMENT
!
WARNING
Logs must be placed in the exact location in heater. Do not change from the proper log positions,
since heater may not function properly and delayed ignition may occur.
The logs are fragile and should be handled with care.
POSITIONING THE LOGS IMPROPERLY WILL CAUSE FLAME IMPINGEMENT AND CARBONING.
TP - LOG PLACEMENT
CENTRE
SUPPORT
LOCATING
PIN
LOCATING
PIN
B
A
C
D
The rear log should be centred on the log support
and rest against the rear wall.
Log
#3
rests against the far left grate post and
onto the locating pin on the centre support. Log
#2
rests against the far right grate post and over
the locating pin on the centre support and against
the tip of log #3.
NOTE: Skewering log#2 onto
the locating pin may be necessary.
Log
(#6)
has a leg that fi ts into an indentation on
the top of log
(#3)
. Log
(#4)
rests in the indenta-
tions on the tops of logs
(#2)
and
(#1)
.
Logs
(#5)
and
(#7)
fi t onto the indentations of the
lower logs.
1
2
3
6
4
7
5
