Continental Access CADV-H-XP08, User Manual

Page: 80 / 131

Digital Video Recorder
67
Highlight the box beside
Alarm-Out
and press the button. A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with the Text Input as you wish. When the DVR detects
text input, it triggers output signals on all the associated Alarm-Out connectors. You can also
have the DVR’s internal buzzer sound if text input is detected.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box beside
Notify and press the button. You can toggle the entire list On and
Off by highlighting Notification and pressing the button. You can toggle the individual
items On and Off by highlighting that item and pressing the button. Highlight OK and press
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the
Notification setup screen and the DVR should be registered in the RAS (Remote
Administration System).
Figure 92 — Text-In Actions 2 screen.
Highlight the desired box under the
PTZ heading, and press the button. A list of PTZ presets
appear. Select the preset positions for each PTZ camera, where you want PTZ cameras to move
to when the DVR detects text input.
Highlight the box beside
Spot Monitor and press the button. A list of SPOT monitors and
cameras appears. Each SPOT monitor can be associated with a camera. The DVR will display
the associated camera on the SPOT monitor whenever it detects an input on the selected text-in
device.
You can save your Text-In changes by highlighting Save and pressing the button. Selecting
Cancel exits the screen without saving the changes.