Continental Access CADV-H-XP08, User Manual

Page: 64 / 131

Digital Video Recorder
51
Highlighting
Schedule On
and pressing the button toggles between On and Off. In the
Schedule On mode, the DVR records video based on the schedule established in the Schedule
screen. When turning Schedule recording Off, you will be asked to confirm your decision, and
displays at the top-left corner of each camera screen. Panic recording will function even
when Schedule is turned off. displays during panic recording.
Highlight the
+
and press the button to add a schedule item.
Highlight the box under the
Day
heading and press the button to change the days that the
scheduled recording will take place. Choose from:
Sun
,
Mon
,
Tue
,
Wed
,
Thu
,
Fri
,
Sat
,
M~F
,
Hol
and
All
.
Highlight the box under the
Range
heading and press the button to change the time range
that the scheduled recording will take place. The smallest time segment you can use is 15
minutes.
Highlight the box under the
Mode
heading and press the button to change the recording
mode that will be used. Choose from:
No Record
,
Time
,
Event
and
Time & Event
.
When the DVR is in the
No Record
mode, it will not record during the preset day and time
range as long as the
PANIC
button is not pressed. Use the
No Record
mode when you do NOT
want the DVR to record during certain times.
When the DVR is in the
Time mode, the icon displays at the top-left corner of the screen.
The DVR will record and displays the icon at the top-left corner of the screen during the
scheduled times.
When the DVR is in the
Event mode, the red icon displays at the top-left corner of the screen.
The DVR will record and displays the icon at the top-left corner of the screen when any event
occurs. When the DVR is in the
Pre-Event recoding mode, the yellow icon displays when
there is no event, and the DVR is not recording. When the DVR is in the Pre-Event mode, the
red and display when any event occurs and the DVR starts recoding.
When the DVR is in the
Time & Event mode, the DVR will follow the Time settings and the
icon displays. The DVR follows the Event settings and the icon displays.
Highlight the box under the
Channels heading and press the button to select which cameras
will be recorded.
Highlight the box under the Settings heading and press the button to define the recording
settings. You can set the ips and Quality of the recording for any modes you set up in the Mode
column. If you do not set the ips and Quality in the Settings column, the DVR will follow the
default settings. See below for details.
Highlight the box under the
heading and press the button to delete the recording settings.
You will be asked to confirm that you want to delete the settings.