Continental Access CADV-H-XP08, User Manual

Page: 117 / 131

User’s Manual
104
Appendix C — WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search recorded
video using Internet Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
y
Operating System: Microsoft
®
Windows
®
98, Microsoft
®
Windows
®
2000, Microsoft
®
Windows
®
XP or later
y
CPU: Intel Pentium III (Celeron) 600MHz or faster
y
RAM: 128MB or higher
y
VGA: 8MB or higher (1024x768, 24bpp or higher)
y
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC and enter the IP address of the DVR and the WebGuard
port number set in the Network setup screen (WebGuard tab) in the address field. (http://ip
address:port number)
NOTE: You will need to get the appropriate IP address for the DVR you want to connect
to and the WebGuard port number from your network administrator.
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with
Netscape.
Figure 123 — WebGuard login screen.
Select between the
WEBWATCH (Web monitoring) and WEBSEARCH (Web search) modes
and enter the appropriate port number of the program. Entering ID and PASSWORD and
clicking the [ LOGIN] button logs in using the selected mode. Selecting Save ID & Pass saves
the ID and password you entered.
NOTE: The port numbers for WEBWATCH , WEBSEARCH and Audio should be the same
port numbers used for Remote Watch , Remote Search and Remote Audio set during
Network setup.