FSG/MTM/002 060511
36
4.3.5
Check and Adjustment of Vertical Positioning
Refer to FSG/TSM/001 for adjustment procedure
Images of the Scan-Width adjustments and the Optical Adjustments Patterns are shown in:
Fig. 4-9 Sx 25, Scan-Width, CCD-Centering and Vertical Positioning
Fig. 4-10 XL 42 Camera A: Scan-Width, CCD-Centering and Vertical Positioning
Fig. 4-11 XL 42 Camera B: Scan-Width, CCD-Centering and Vertical Positioning
Fig. 4-12 XL 42 Camera B: Scan-Width, CCD-Centering and Vertical Positioning
Fig. 4-13 Optical Adjustment Pattern, 1 Camera, 25”
Fig. 4-14 Optical Adjustment Pattern, 3 Camera, 42”
The aim of this adjustment is to place the scanline in the correct “Vertical Position” within the
scan-area, and to ensure that the scanline is “horizontal”.
The Vertical Positioning of the CCD-Cameras is based on the number of black lines of the
Vertical Position Pattern that crosses the scanline. The step height of the Black Lines in the
Vertical Position Pattern is shown in the table following:
Model Optical
Adjustment
Pattern
Step Height
of
Black Lines
Step Height
0 through
16
Black Lines
COUGAR Sx 25
CHAMELEON Sx 25
6779D105, sub-pattern B
0.15 mm
2.25 mm
CHROMA XL 42
CRYSTAL XL 42
6779D134
, sub-pattern B
0.15 mm
2.25 mm
The cameras are adjusted to 8 Black Lines of the Vertical Position Pattern at both ends of the
scanlines.
Interaction
After completing all camera adjustments, run Scanner Maintenance.
4.3.6
Final Check
As the above adjustments interact:
Check, and if necessary readjust steps 4.3.2 through 4.3.5
Summary of Contents for CHAMELEON 25
