FSG/MTM/001 060511
164
When replacing: Make sure that the cylinder shaped nut on the spindle rests correctly in the
cutout of the Vertical Alignment Arm. The Motor Bracket should be pushed to the uppermost
position when tightening the fixing screws to ensure sufficient tension of the drive belt.
The Camera Motor (Bracket) is now free to be removed.
Run SCANtest 6, Test 11 or Scanner Maintenance (Vertical Alignment).
9.7 Camera Board, CBE/CBF
Note: The Camera Board includes Mounting Plate and CCD, these parts should never be
disassembled
,
Remove the Original Guide Plate.
Remove the Top Cover.
Disconnect ribbon cable from the CBE/CBF-Board.
Remove the Camera Motor.
Remove the four fixing nuts for the CCD Mounting Plate, see Fig. 4-3, page 84.
The Camera Board (with Mounting Plate) is now free to be removed.
After replacement of CBE/CBF-Board, do:
•
CCD-Centering, Section 4.2.6, page 109.
•
Vertical Positioning, Section 4.2.7, page 110.
•
Check Scan-Width, if it is within the limits given in Section 4.2.5, page 99, Focus
will also be OK, and no further adjustments are required.
•
Run Scanner Maintenance, Section 6.1.7, page 142.
These adjustments can be made without loosening the Camera Fixing Screws and
without loosening the Focus Lock Ring / Lock Screw.
9.8 Lamp Sensor Board, OSB
Remove all Covers.
Remove the Mirror Chassis.
There is now free access to the Lamp Sensor Board.
After replacement:
Readjust the Lamp Driver, Section 3.4.2, page 30.
Check Camera Adjustment, Chapter 4.2, page 86
, especially Vertical Positioning, Section
Run Scanner Maintenance.
Summary of Contents for CHAMELEON 25
