Configuration and Setup
3-4
8
Set localization Preferences
On the iJET Panel -
Select Menu > Advanced > Options >… to set preferences for language, paper series and
media handling (loading).
See the section on options for ”
Personalizing and localizing the system
” for details.
Menu
9 Make
Printer Setup settings on the scanner
You can setup for two printer types – a B&W printer and a color printer. After you setup your printers, pressing
the Color Copy button will send the output to your color printer and pressing the B&W Copy button will send the
output to your B&W printer.
On the iJET Panel
Printer set up is described for
Color Printer
below. The same rules and method applies for
B&W Printer
setup.
Select
Menu
>
Advanced
>
Printer Setup
>
Color Printer
to make settings.
Select
Menu
>
Advanced
>
Printer Setup
>
Color Printer
>
Interface
>
USB
if you used a USB connection
between the scanner and the printer and
LAN
if you used a LAN connection. If you selected
LAN
, use the arrow
up/down buttons to
enter the
printer’s
IP address
.
Select the
Printer Model
setup method –
Auto Configure
,
Printer
List
or C
ustom Setup
and
apply the additional
setting(s) attached to the
Printer Model
setup method you selected.
See the section on “Printer Setup on the Scanner” for more details.
10
Menu
Turn On and Prepare the Printer
Perform actions and settings on the printer device such as check that the right paper is loaded and the printer is
ON. See your printer’s documentation for help.
11
Create a system media type for your printers media (Closed Loop Calibration)
For the color printer only - You must create a system media type profile in order to color match paper media,
printer and scanner before using the system. Identify the media type (Coated, Glossy, Semi-Glossy) you use
with the printer then perform closed loop calibration (3 steps).
On the iJET Panel
Select
Menu
> Advanced > Options > Closed Loop Cal.
Press Enter and then use the arrows up/down buttons to reach the right media type and
Enter
to select.
On “
Print Sheet
” select
Enter
. The system will print a color patch sheet.
Feed the sheet into the scanner
On “
Scan Sheet
” select
Enter
. The system will scan the color patch sheet and calculate color matching values
for future jobs with the current media type.
See the section on “how do I… Create a New Media Type” for more details.
…..
12
Test your system
Make a simple copy to test your system.
See the section on “how do I… Make a Copy” for details.