Contex AA51A Operator'S Manual Download

Page: 11 / 125

The iJET Panel

2-6

2.6

You will learn here how menu options and values are shown in the display

d arrows up/down to reach them for

menu option items

option item can be shown at a time in the

t menu option item and its current value is

shown in the display window as shown below for the

Menu

button.

hoto”. The “>” marks which one of the two lines is currently active for changing with the

rrow up/down buttons. In the example above, the first line, i.e the menu option item line is

5. The “>” marker in the example above shows that the menu option item “Org, Type B&W” is

now active and “Sepia” is its current setting. To enter the menu option in order to make

changes to its setting, you press the

Enter

button.

6. The “>” marker now indicates that the setting for “Org. Type B&W” option can be changed.

Pressing the up/down arrow buttons will move through the available settings. Press the

Enter

button

when the right setting is displayed to the right of the “>” marker. The

selected setting will then become the option’s active setting and the “>” marker will hop

How do I Navigate the iJET Panel Menus?

This section explains how you find and set the many options behind the

Menu

button and the

Scan to

button.

window and how you use the control buttons

Back

Enter

setting and changing their values.

2. When you press the one of these buttons you start its underlying menu.

or…

3. A menu contains an ordered list of menu option items and each of these

can be set to different values. Only one menu
display window. When you start a menu, its firs

“P
a

The first line in the display is the menu option item and the second line is its current value.
In the example above, the current menu option item is “Org. Type Color” and its value is

active.

Pressing the down arrow button

in this case will move the menu forward to the next

menu option item and that option’s own current setting as shown below:

In the display panel the “>” mark will move down to the next line as shown below.

back to the menu level (top line) so you can resume leafing through the menu option items
with the arrow up/down buttons.

Org. Type B&W

Sepia

Menu option item

Current setting for the option item

> Org

. Type B&W

pia

Scan to

> Org. Type Color

Photo

Menu option item

Current setting for the option item

Enter

Summary of Contents for AA51A






























































































































Search results

Summary of Contents for AA51A

Reviews:

Related manuals for AA51A

Brands by name

Popular brands

Contex AA51A, Operator'S Manual

Search results

Summary of Contents for AA51A

Reviews:

Related manuals for AA51A

Brands by name

Popular brands