Configuration and Setup
3-22
6.
c d to the scanner’s
Press arrow down
to display the IP setting dialog and then
. The default IP
e
7.
o select the
Printer Model
setup method: Press arrow down
to reach and display the
to display one of the following
Printer Model
options and
7.1
e the printer’s parameters automatically from the
ystem searches for the printer on the port as indicated by your
Interface
If you are using LAN interfacing, either with a printer directly c
te
LAN port or to a remote printer on the network, you will need to set the printer’s IP address.
onne
shows 4 groups with 3 zeros in each group. Use the arrows up/down
to change th
first group (3 digits). Press
to move to the next 3 digit group and again the arrows
to change them. Repeat this with each group until you have the right IP displayed and
press
Enter
o confirm.
T
t
You must now set definitions and parameters for the actual
Printer Model
. Printer Model
settings can be set in 3 ways (methods): automatically, by selecting a printer model from a
list of predefined printers or through making custom settings manually.
Printer Model
dialog and then
to move the “>” mark down and thus enter the
Printer Model
options.
Use the arrows up/down
p
Auto Configure
tells the system to retriev
ress
to confirm your selection:
Auto Configure
printer itself. The s
setting (USB or LAN-IP address) and then when it
the
Custom Setup
options instead. The printer must support SNMP in order for its settings
to be detected automatically.
finds it, the printer’s setup parameters
are saved in the scanner device.
Not all printer models support automatic setup and you will need to use the
Printer List
or
NOTE
: the actual search and s
to print and not during setup. It is therefore recommended to make a dispensable test copy
just after completing the steps for setting up your scanner.
ettings upload process takes place the first time you try
Printer Model
> Auto Configure
Enter
Printer Model
> Auto Configure
Enter
Press
to reach the IP setting dialog.
Interface
>
LAN
Use the arrows to change the IP
values as described above.
IP Address
> xxx.xxx.x
x
xx.xx
Enter
Enter
Enter