Contex AA51A Operator'S Manual Download Page 72

Page: 72 / 125

Using the scanner, how do I …?

6-9

6.2.6 Set the File Format ( TIFF, JPEG, PDF )

On the iJET Panel –

1. If you are not already in the Scan-to-File menu, start/enter the menu with the

Scan to

button

2. Press the arrow up/down buttons

as described in the beginning of this section.

Scan to

to move through the Scan-to-File Menu options until

3. Press

the display shows

File Format.

Enter

to move the “>” marker down so you can change the current option’s value if

needed.

Press the arrow up/down buttons

to move through the values for the

File Format

option. The following

File Formats

are available.

–

If selected you can set a quality factor from 1 to 100. 70 is default.

JPG –

If selected you can set a quality fac

PDF

tor from 1 to 100. 70 is default.

TIFF

–

If selected you can set quality to

Uncompressed

PackBits

Press the arrow up/down buttons

to change the value displayed.

Press

Enter

to accept the

File Format

and move the “>” marker back up. From here you

can set the File Format quality. See details below.

Press

Enter

to accept the File Format. The “>

“marker moves back up.

File Format

PDF

When you press

Enter

, the “> “marker moves

down indicating you can change the option value.

File Format

PDF

JPEG

Summary of Contents for AA51A






























































































































Search results

Summary of Contents for AA51A

Reviews:

Related manuals for AA51A

Brands by name

Popular brands

Contex AA51A, Operator'S Manual

Search results

Summary of Contents for AA51A

Reviews:

Related manuals for AA51A

Brands by name

Popular brands