Chapter
4
BIOS setup
Chapter4
BIOS setup
BIOS setup sets various setting during startup. When using the system for the first
time, besure to run BIOS setup. Once set up, the specified details will be backed up.
Do not change items not described in this document.
The system may become unstable and may not start up.
Starting the setup screen
When you turn on the power to the system, if the system is functioning normally, the
“Press DEL to enter SETUP” screen appears. Then press the <DEL> key. After a few seconds,
a setup utility can be started.
AMI BIOS (C) 2006 American Megatrends, Inc.
SMB-MQ570-LLVA BIOS Ver. 1.00
CPU : Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz
Speed : 3.33 GHz
Entering SETUP...
Press F11 for BBS POPUP
The IMC is operating with DDR3 1333MHz, 9 CAS Latency
DRAM Timings: Tras:24/Trp:9/Twr:10/Trfc:74/Twtr:5/Trrd:4/Trtp:5/Tfaw:20
Initializing USB Controllers .. Done.
1912MB OK
USB Device(s) : 2 Hubs
Auto-Detecting Pri Master..IDE Hard Disk
Auto-Detecting Pri Slave...
Figure 4.1 Initial screen
User’s Manual
47