Contec VPC-2000, User Manual

Page: 27 / 144

Chapter
３
Hardware setup
◆Jumper setting
■CMOS clear setting：JCMOS1
CMOS Clear will reset the contents of the CMOS to initial BIOS values. Clearing the CMOS
will not reset the clock.
Table 3.3 CMOS clear setting
JCMOS1 Function
State usually
(Factory default setting)
CMOS clear
Always set CMOS Clear with the AC cable unplugged, and before reconnecting the power,
restore it to its normal setting.
Clearing the CMOS while the power is connected may damage the board.
■JMECLR1
Use the factory default settings.
Table 3.4 JMECLR1 setting
JMECLR1 Function
State usually
(Factory default setting)
User’s Manual
21