Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E User Manual Download Page 19

Page: 19 / 99

2. Setup

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E

Step 1 Installing the Software

This section describes how to install the Driver libraries.

Before installing the hardware on your PC, install the Driver libraries from the bundled

API-PAC(W32) CD-ROM.

The following description assumes the operating system as Windows Me. Although some user

interfaces are different depending on the OS used, the basic procedure is the same.

About the driver to be used

Two analog I/O drivers are available: API-AIO(WDM) and API-AIO(98/PC)W95/NT.

API-AIO(WDM) is a new driver to perform analog input/output under Windows.

API-AIO(WDM) was developed to improve the conventional product version of API-AIO(98/PC) in the

ease of use and functionality.

It is advisable to use API-AIO(WDM) for you to use an analog I/O device. API-AIO(WDM) will

support new OSs and devices in the future but will not support Windows NT 4.0, Windows 95, ISA bus,

or C-bus.

Use API-AIO(98/PC) if your operating environment contains such an unsupported piece of software or

hardware.

Check the following selection guide to easily select the driver to be used.

OS to be used

Device type

PCI bus, PC Card

Usable language

API-AIO(WDM)

VC4, VC2, VB4

API-AIO(98/PC)W95, NT

Yes

ISA bus, C(98)bus

Windows 95/Windows NT4.0

Windows XP/Windows 2000

Windows Me/98

VC6.5, VB6.5, Delphi,

C++Builder

Is the first use of the analog board?

Is the upgrade of existing system

using API-AIO(98/PC)W95/NT?

No (Already in use)

Yes

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E




































































































Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands

Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E, User Manual

Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands