Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E User Manual Download Page 32

Page: 32 / 99

2. Setup

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E

Plugging the Board

(1) Before plugging the board, shut down the system, unplug the power code of your PC.

(2) Remove the cover from the PC so that the board can be mounted.

(3) Plug the board into an expansion slot.

(4) Attach the board bracket to the PC with a screw.

(5) Put the cover back into place.

CAUTION

Do not touch the board's metal plated terminals (edge connector) with your hands.

Otherwise, the board may malfunction, overheat, or cause a failure.

If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

Do not install or remove the board to or from the slot while the computer's power is turned on.

Otherwise, the board may malfunction, overheat, or cause a failure.

Doing so could cause trouble. Be sure that the personal computer or the I/O expansion unit power is

turned off.

Make sure that your PC or expansion unit can supply ample power to all the boards installed.

Insufficiently energized boards could malfunction, overheat, or cause a failure.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E




































































































Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands

Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E, User Manual

Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands