Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E User Manual Download Page 33

Page: 33 / 99

2. Setup

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E

Step 3 Installing the Hardware

For using an expansion board under Windows, you have to let the OS detect the I/O addresses and IRQ

to be used by the board. The process is referred to as installing the hardware.

In the case of using two or more boards, make sure you install one by one with the Add New Hardware

Wizard.

Turning on the PC

Turn on the power to your PC.

CAUTION

The board cannot be properly installed unless the resources (I/O addresses and interrupt level) for

the board can be allocated. Before attempting to install the board, first determine what PC

resources are free to use.

The resources used by each board do not depend on the location of the PCI bus slot or the board

itself. If you remove two or more boards that have already been installed and then remount one of

them on the computer, it is unknown that which one of the sets of resources previously assigned to

the two boards is assigned to the remounted board. In this case, you must check the resource

settings.

When Using API-AIO(WDM)

(1) The “Add New Hardware Wizard” will be started.

Select “Specify the location of the driver”, then click on the [Next] button.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E




































































































Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands

Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E, User Manual

Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands