Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E User Manual Download Page 69

Page: 69 / 99

4. Functions

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E

4. Reset

Various states can be reset by executing the following reset commands:

All reset

This command resets the entire device, thereby initializing the device.

Status

This command resets the sampling clock error status and AD conversion error status.

Memory

This command resets the following memory related states.

Resets the sampling count to 0.

Resets the status for the specified sampling count to OFF.

Resets the buffer overflow status to OFF.

Resets the repeat count to 0.

5. Extended function

Simultaneous Sampling Control

Simultaneous sampling is executing AD conversion on multiple channels at the sampling clock timing.

The simultaneous sampling unit ATSS-16 available as an option provides this board with the 16-channel

simultaneous sampling feature.

Channel Expansion

Using the channel expansion sub-board ATCH-16(PCI) or ATUH-16(PCI) available as an option

increases the maximum number of input channels to 32 (16 channels in differential input mode).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E




































































































Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands

Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E, User Manual

Search results

Summary of Contents for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Reviews:

Related manuals for PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Brands by name

Popular brands