4. Functions
54
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Repeat
“Repeat” indicates the number of repetitions of sampling to be executed, from when the sampling start
condition is satisfied until the end of sampling, including delayed sampling.
The number of repetitions is set by means of software, for which conversion is repeated. You can set
an infinite number of repetitions, in which case the conversion is terminated by the software abort
command.
Input data items are stored to the memory sequentially. The repetition state can be subject to status
monitoring and application notification.
This board does not support the Repeat feature when the sampling start condition is "software".
Clock
The sampling clock controls the sampling frequency. You can select both the internal sampling clock and
the external sampling clock. The sampling clock is selected by means of software.
-
Internal sampling clock
The clock signal from the on-board clock generator is used.
-
External sampling clock
The edge of the digital signal input from an external device is used for the sampling clock.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
