4. BIOS Setup
User’s Manual
45
PnP/PCI Configuration Setup
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configuration Setup
Item Help
Menu Level
PNP OS Installed
No
Reset Configuration Data
[Disabled]
Resources Controlled By
[Auto(ESCD)]
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
↓→←
:Move Enter:Select +/-/PU/PD:Values F10:Save Esc:Exit F1 General Help
F5: Previous Values F6: Fail-Safe Defaults F7: 0 timized Defaults
↓
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
Figure 4.16. PnP/PCI Configuration Setup Window (factory setting)
Description
Choice
PNP OS Installed
The default is "No"; you usually do not have to
change this setting.
No
Yes
Reset Configuration Data
The default is "Disabled"; you usually do not have
to change this setting.
After upgrading the BIOS, start it up with
"Enabled" selected, then select "Disabled" again.
Disabled
Enabled
Resource Controlled by
The default is "Auto(ESCD)"; you usually do not
have to change this setting.
Auto(ESCD)
Manual
