Contec AD12-8(PM) User Manual Download Page 26

Page: 26 / 81

2. Setup

AD12-8(PM)

Insert the PC Card

Insert the PC card into the slot on the PC.

Check that the power to the PC is turned off and insert the card into the PC card slot on the PC.

Firmly insert the card into the slot with the orientation indicated by the arrow symbol on the card, as

shown in Figure 2.4.

The PC card has a key to prevent it from being inserted incorrectly. Do not try to force the card into

the slot the wrong way around as this may damage the card or the slot on the PC. Also, check the card

slot on your PC as the slots on some PCs are oriented so that cards is inserted with the topside facing

down.

Refer to the manual for your PC for instructions on how to remove the card.

Figure 2.4. Insert the PC Card

CAUTION

Take note of the following points as inappropriate handling of the PC card may damage the card or

connector socket and may result in a bad connection.

Always insert the PC card with the correct orientation and in accordance with the instructions.

Do not hold the card by the cable or connector when inserting the card into the slot

Do not move the PC with the cable still plugged in.

Do not apply any excessive force to the cable socket on the PC card such as by pulling on the

cable connector.

Do not place any objects on top of the cable connector.

Summary of Contents for AD12-8(PM)


















































































Search results

Summary of Contents for AD12-8(PM)

Reviews:

Related manuals for AD12-8(PM)

Brands by name

Popular brands

Contec AD12-8(PM), User Manual

Search results

Summary of Contents for AD12-8(PM)

Reviews:

Related manuals for AD12-8(PM)

Brands by name

Popular brands