Contec AD12-8(PM) User Manual Download Page 24

Page: 24 / 81

2. Setup

AD12-8(PM)

Check the PC

Check that the PC has a TYPE II PC card slot that complies with PCMCIA 2.0/JEIDA 4.1 or later

(including PC Card Standard).

Connecting the PC Card to the Connector Cable

Plug the PC card connector of the CB-37FS cable into the AD12-8(PM) PC card. The flat side of the

connector should face the same way as the topside of the card as shown in Figure 2.2.

Make sure you connect the cable as shown in Figure 2.2 with the topside of the connector (indicated by

the arrow symbol) aligned with the topside of the card.

CAUTION

When plugging in the cable, align the cable connector with the PC card socket and push firmly into

place. Do not apply any excessive force to the socket on the PC card as this may damage the

socket or result in a bad connection.

Also, never insert or unplug the connector while the PC power is turned on. However, it is OK to

insert or remove the card.

Connection Cable

Marks

PC Card

PCMCIA Slot Side

Locking Spring

Locking Metal Fitting

Figure 2.2. Connecting the PC Card to the Connector Cable

Summary of Contents for AD12-8(PM)


















































































Search results

Summary of Contents for AD12-8(PM)

Reviews:

Related manuals for AD12-8(PM)

Brands by name

Popular brands

Contec AD12-8(PM), User Manual

Search results

Summary of Contents for AD12-8(PM)

Reviews:

Related manuals for AD12-8(PM)

Brands by name

Popular brands