1. Before Using the Product
6
AD12-8(PM)
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
-
Do not strike or bend the PC card. Doing so could damage the PC card.
Otherwise, the PC card may malfunction, overheat, cause a failure or breakage.
-
Do not subject the socket used to connect the cable to the PC card to knocks or other excessive
force.
Failure to observe this precaution may cause misoperation, overheating, faults, or other damage.
-
Connect the cable to the card before inserting the card into the PC.
Failure to observe this precaution may cause misoperation, overheating, or faults.
-
When inserting the PC card, check that you are inserting the card with the correct orientation and
that the card is inserted firmly.
Inserting the PC card incorrectly may damage the PC card or connector or result in a bad
connection.
-
Ensure that the PC power supply has sufficient capacity for all mounted cards.
An inadequate power supply may cause misoperation, overheating, or faults.
-
The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the
contents.
-
Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
