Contax SW 2524, Owner'S Manual, Page: 37 / 322

Pre-Configuration Planning
976-0043-01-01 2–3
Location
Considerations
❐
Mounting location for optimal performance and easy access of all
components
❐
Ventilation and clearance requirements for all components
❐
Mounting method (wall or shelf)
❐
Additional items/materials required for mounting
Grounding
Considerations
❐
Grounding type (i.e., ground bar, ground bus, or ground rod)
❐
Neutral-to-ground bonding requirements
❐
Lightning and surge protection
Battery
Considerations
❐
Battery type
❐
Battery cables and sizes
❐
Size of the battery bank and it’s configuration
❐
Location of battery bank to rest of system
Wiring
Considerations
❐
Types and sizes of wires needed
❐
Types and sizes of conduits needed
❐
Types and sizes of fuses and/or disconnects
❐
Additional equipment for code compliance (e.g., service panels,
conduit boxes, emergency shutoff switches etc.)
❐
Wire Routing
Additional
Equipment
❐
Additional components or accessories to complete the system design
(e.g., remote monitors, interface cables, stacking cables, DC charge
controllers, auxiliary load controllers, T240 autotransformers etc.)
Generator
Considerations
❐
Voltage Output Requirements
(120 Vac only, 120/240 Vac, or 240 Vac only)
❐
Auto-Start or Manual-Start
Important:
Auto-start generators require the addition of the GSM to
enable the inverter to control the operation of the generator. See
“Generator Considerations” on page 2–19 for additional information.