Contax SW 2524, Owner'S Manual, Page: 261 / 322

User Menu Settings
976-0043-01-01 B–3
Press reset for factory defaults Press to refresh the LCD display.
04 Meters Menu See “04 Meters Menu” on page 8–22 for details.
04A Battery Actual VDC 13.2 to 35.5 Read Only 20.0 to 71.0 Read Only
04B Battery Comp VDC 13.2 to 35.5 Read Only 20.0 to 71.0 Read Only
04C Inv/Chr Amps AC - 63 to 63 Read Only - 63 to 63 Read Only
04D Input Amps AC 0 to 63 Read Only 0 to 63 Read Only
04E Load Amps AC 0 to 63 Read Only 0 to 63 Read Only
04F Inverter Volts AC 00 to 163 Read Only 0 to 163 Read Only
04G Grid (AC1) Volts AC 00 to 163 Read Only 0 to163 Read Only
04H Gen (AC2) Volts AC 00 to 163 Read Only 0 to 163 Read Only
04I Frequency Hertz 52 to 68 Read Only 52 to 68 Read Only
04J Max Bulk/EQ Time h:m 00:00 to
23:50 Read Only 00:00 to
23:50 Read Only
04K Battery Temp Degrees C -28 to 60, OL Read Only -28 to 60, OL Read Only
04L Fan Speed 00, 01, 02,
03, 04 Read Only 00, 01, 02,
03, 04 Read Only
05 Error Causes Menu See “05 Error Causes Menu” on page 8–25 for details.
05A Over Current NO YES Read Only NO YES Read Only
05B Transformer overtemp NO YES Read Only NO YES Read Only
05C Heatsink overtemp NO YES Read Only NO YES Read Only
05D Low Battery Voltage NO YES Read Only NO YES Read Only
05E High Battery Voltage NO YES Read Only NO YES Read Only
05F External err (stacked) NO YES Read Only NO YES Read Only
05G Input Relay Failure NO YES Read Only NO YES Read Only
05H Gen Failed to Start NO YES Read Only NO YES Read Only
05I Gen Stopped due to V/F NO YES Read Only NO YES Read Only
Table B-1 User Menu Default and User Settings
User Menus
Sine Wave Plus 2524 Sine Wave Plus 2548
User
Settings Range/
Display Default
Settings Range/
Display Default
Settings