Contax SW 2524, Owner'S Manual, Page: 135 / 322

Inverter Control Module Features
976-0043-01-01 5–3
Inverter Control Module Features
There are nine push-buttons, eight Light Emitting Diodes (LEDs), one
contrast adjustment and one Liquid Crystal Display (LCD) on the front of
the ICM. The push-buttons are grouped into sets depending on their
function. The LEDs also are grouped by function.
The display
The system information, menu items, and set points are all displayed on a
Liquid Crystal Display (LCD). The contrast of the display can be adjusted
by the Contrast Adjustment screw at the bottom of the panel.
The cursor
When navigating through the menu system, the selected item is indicated
in the LCD by a shaded, flashing box over the first letter/number of the
set point. This special highlighting is called the "cursor". Pressing the
SET POINT buttons will move the cursor left (–) or right (+) within the
available options.
Display contrast
To change the display contrast, use a small, flat-blade screwdriver in the
slot provided to make the adjustment.
Push-buttons
Eight push-buttons enable access to internal software to program user-
specific parameters and to monitor the system. These push-buttons access
the User Menu, Basic Setup Menu, and the Advanced Setup Menu. One
push-button is available for resetting factory defaults.
ON/OFF Menu Buttons
These push-buttons directly access either the Inverter User Menu or the
Generator User Menu.
•
INV ON/OFF (Red) Button
Pressing the red INV ON/OFF button directly accesses the menu item
01A Inverter .
• GEN ON/OFF (Green) Button
Pressing the green GEN ON/OFF button directly accesses menu item
02A Generator .