Contax SW 2524, Owner'S Manual, Page: 193 / 322

Menu Item Descriptions
976-0043-01-01 7–21
Notes:
1. The generator will be prevented from automatically starting when
the inverter’s time of day is in the “quiet time” period–between
24C Quiet Time Begin h:m and 24D Quiet Time End h:m . At
which time, it will only start if the 11C Set Low Battery Cut
Out VDC or 26G Read LBCO 30 Sec Start setting for the LBCO
delay period is reached.
2. If the generator is automatically stopped (except for Gen exercise),
the stop command will be provided after the adjustable cooldown
period (
24G Gen Cooldown Timer Minutes ) has finished
3. Most generators will shut down immediately after receiving an
automatic shutdown command. Some generators may have an
internal automatic cooldown period and continue to run.
4. During Quiet Time, the Auto-start generator is prevented from Auto
starting unless the battery voltage reaches the LBCO setting for the
LBCO delay period.
5. An auto-start generator will turn off if an AC source is connected to
the AC1 terminal (unless AUTO start was based on exercise start or
RN 2 Mode was selected for the RY7 Mode.)
6. If the inverter is OFF or in Bypass Mode (AC1 or AC2 selected) and
RY7 Mode is not RN2, all generator auto-start functions (except for
exercise start) are disabled.
7. The auto-start generator will stop immediately under any condition
if OFF is selected under the 02 Generator Menu .
8. No battery charging occurs if the auto-start generator is started
based on exercise period.
9. The inverter will attempt up to six auto-generator starts if RY7
Mode = GS or RN1. The inverter will attempt one auto-generator
start if RY7 Mode = RN2.
10. The auto-start generator will always finish with cooldown unless
turned off or exercise start/stop.
11. The auto-start generator does not shut down, but begins the
cooldown period when the 24C Quiet Time h:m is reached.