30
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity
build-up.
It is essential to handle the grinding wheels very
carefully.
Grinding wheels can never be thrown, rolled or
bumped on the ground without a buffer between the
grinding wheel and the floor. They must always be
stored in a dry, low temperature room so that there
is no mechanical damage and the products are not
exposed to moisture, frost, sudden temperature
deviations or Aggressive materials.
TECHNICAL SPECIFICATIONS
Rated voltage
230-240V~50Hz
Input power
1700 W
No load speed,
5000min
-1
Cutting width
0-45mm
Cutting depth
14/24/34/44mm
Size of discs
Ф
2x150mm
shaft thread
M12
Weight
5.5 Kg
Noise emission values measured according to
relevant standard.
Acoustic pressure level
L
PA
105 dB(A) K = 3 dB(A)
Acoustic power level
L
WA
116 dB(A) K = 3 dB(A)
ATTENTION !
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
must be worn.
Weighted root mean square acceleration according
to relevant standard. :
a
h
= 3.1m/s ² K = 1,5 m/s ²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
SERVICE DEPARTMENT
_ Damaged switches must be replaced by our after-
sales service department.
_
If replacing the power cord is necessary, it
should be done by the manufacturer or his agent
to avoid a hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product
as well as spare parts. Exploded views and
information on spare parts can also be found
under:
www.eco-repa.com
CONSTRUCTOR application service team will
gladly answer questions concerning our products
and their accessories : [email protected]
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
DOUBLE YOUR WARRANTY
Register your warranty on
www.elemtechnic.com
BY REGISTERING:
* You double the duration of your warranty
* You benefit from regular information on our new
products and our promotions
Summary of Contents for CTRAIN1501M
Page 2: ...2 5 4 6 3 1 8 8 12 7 11 10 9 2 ...
Page 3: ...3 CHANGER LES DISQUES VERANDER SCHIJVEN CHANGE DISCS ...
Page 4: ...4 ...
Page 33: ...33 ...
