![background image](http://html.mh-extra.com/html/conrad/86-01-95/86-01-95_operating-instructions-manual_2653734069.webp)
69
Proceed as follows to enter the correction value:
• Activate the digital compass by pressing the "COMP" button.
• Press the "MENU" button.
• Use the "
" and/or "
" buttons to select the declination menu point and press the "ENTER"
button.
• Use the "
" and/or "
" buttons to enter the declination value and confirm with the "ENTER"
button.
In the compass display, once a declination has been entered, you can press
the "ENTER" button to switch between compass display with and without
declination.
In the left bottom of the display a "D" appears when the correction value is being
used.
d) Navigation Function
You can enter a direction value here, if the deviation from the value is more than +/- 8° a signal
tone is emitted.
• Activate the digital compass by pressing the "COMP" button.
• Press the "MENU" button.
• Use the "
" and/or "
" buttons to select the navigation function menu point and press the
"ENTER" button.
• Use the "
" button to switch the signal tone on or off.
• You can use the "ENTER" button to switch the correction value of a declination on or off
(when the correction value is active a "D" appears at the bottom left).
• Change the direction value (degrees) to be used by the navigation function by pressing the
"MENU" button.
Then use the "
" and/or "
" buttons to select the input field and use the "
" and/or "
"
buttons to set the numerical value in the input field.
Confirm the selections by pressing the "ENTER" button.
• Exit the navigation function by pressing the "CANCEL" button. After a check question you
return to the normal compass position.