![background image](http://html.mh-extra.com/html/conrad/86-01-95/86-01-95_operating-instructions-manual_2653734054.webp)
54
15. Alarm Function
• Select alarm function
Briefly press the "MODE" button repeatedly until the alarm time is displayed ("ALARM" in
display).
• Switching the alarm function on/off
Press the "
" or "
" button to switch the alarm function on or off. If the alarm function is
active, a small bell symbol "
" appears in the display.
• Setting the alarm time
Switch the alarm function on first.
Press the "ENTER" button for approx. 3 seconds until the minutes of the alarm time start to
flash. Use the "
" and/or "
" buttons to set the minutes, hold down the corresponding
button for an extended period of time to adjust the value faster.
You can use the "
" and/or "
" buttons to switch to setting the hours or back to setting the
minutes.
You save the settings and exit the setting mode by briefly pressing the "ENTER" button.
• Stopping the alarm, snooze mode ("SNOOZE")
Stop the alarm signal by pressing the "CANCEL" button.
Pressing any other button activates the snooze mode ("SNOOZE"). The alarm signal is
interrupted for 5 minutes and "Zz" is shown in the display, then the alarm signal is continued.