4
13.
Position power brackets over the top of the M4 square nuts and screw in place with 2x M4 x 12
button heads. Repeat for all power brackets
13
Connecting the power cables
Note: Step 13 refers to standard Connection Co.Table power bracket consisting of 2 power pockets
and 1 dual USB power socket. Assembly instructions refer to this power only. A maximum of 6 power
sockets to be connected per distributor. Our standard power fits with this safety requirements. If
your power brackets differ then please contact our customer services.
14.
Once all power brackets are in place (image shows power in 3,990mm table, for 2,600mm
there will only be two power brackets) then they all need to be connected via a distributor block
to run wires down leg and out of Co.Table.
15.
Connect the two leads from the power sockets into the distributor, leaving space for one more
lead (image shows cables from 3,990mm table connected). Lead from 5m extension cable will
be connected into distributor. Power cable set up is now complete.
If your Co.Table has been specified with lamps you will additionally receive lamp stems, distributor
blocks, 2.0m cable and 5.0m cables with original components.
14
15
Assembly Instructions
Co.Table
