7
23.
Ensure leg cut out covers have been removed. Feed power cables through hole in table tops
and run along to selected leg. All legs can cater for power. Once cable has been fed down leg,
reattach leg cut out cover
Adding the under panels
The under panels will hide the leads and power underneath the table. For the 2,600mm table you
will need 2x under panels.
24.
Face under panel to
under panel brackets and
secure loosely with M6 x 16
furniture bolts
25.
Once all panels are in
position, secure tightly all
M6 x 16 furniture bolts in
place. Note that end panels
will have corners cut out
Your Co.Table is now complete.
Please proceed to page 14 if
poseur table needs adding.
23
24
25
Assembly Instructions
Co.Table
