13
22.
Position the larger utility rail
bracket on underside of
table facing the small utility
rail bracket. Connect larger
utility rail bracket to small
utility rail bracket and to
underside of the table tops
using M6 x 16 furniture bolts.
Complete on all table top
cut outs to secure utility rail
22
Utility rail is now secure to table tops.
23.
Ensure leg cut out covers have been
removed. Feed power cables through
hole in table tops and run along to
selected leg. All legs can cater for
power. Once cable has been fed down
leg, reattach leg cut out cover
Adding the under panels
The under panels will hide the leads and
power underneath the table. For the
3,990mm table you’ll need 3x under panels.
23
24.
Face under panel to
under panel brackets and
secure loosely with M6 x 16
furniture bolts
25.
Once all panels are in
position, secure tightly M6
x 16 furniture bolts in place.
Note that end panels will
have corners cut out
Your Co.Table is now complete.
Please proceed to page 14 if
poseur table needs adding.
24
25
Assembly Instructions
Co.Table
