2
Assembly Instructions
Co.Table
4.
Repeat step 3 four times until all legs are loosely attached. Once all legs are in place, tightly
secure to complete the frame and legs assembly
Adding under panel brackets
This can also be done after the attachment of the laminate table tops, but we advise that these
are completed when the laminate table tops are off for ease of build.
For the 2,600mm underframe, there will be 10 brackets to connect. 4 along each side and 1 along
each short side.
5.
These under panel clips are attached to the inside of the metal underframe. Place the bracket
hole over the pre-cut holes in the under frame. Secure brackets with 10x 5/8 self tap
Adding the laminate table tops
Your 2,600mm underframe frame will have 12 holes cut into the top of the under frame, to allow for the
laminate table tops to be attached. These will be located in the corners and centrally on the long sides.
6.
Firstly, position loosely the laminate tops on top of the built structure
7.
Once both table tops are in place, insert 3x wooden biscuits and 4x double pins into the holes
provided along the facing edges of one of the tables. Face the adjacent table so that these line
up and push together evenly from both sides of the table
8.
On the underside of the
laminate table tops, there
will be 4x cams already
inserted. Tighten securely
with an allen key to bring the
table tops together
4
5
6
7
8
