Installation Instructions
Positioning module
Conductor rail program 0832, C-rail,
Console, ProShell
MV0800-0015a-EN
www.conductix.com
translated document
Page 19 of 23
6
Positioning band
6.1
Operating principle of the BPS laser (BPS 34/BPS 37 and BPS 300 series)
NOTE!
The barcode readers are not included in the scope of delivery!
The laser reads several code labels depending on the distance between the positioning band and the optics. A distance of 150 mm
yields a reading width of 130 mm (theoretically 3.25 labels). Taking the inclination into account, the laser therefore reads three of at
least one required label.
The laser needs a code label to calculate and provide the position.
This means that the system has a high level of resilience to damage or contamination of the positioning band. Note that the reading
head is slightly inclined. This causes oblique scanning which hides damage to the positioning band, such as grinding marks.
Fig. 32: Positioning band
