Installation Instructions
Positioning module
Conductor rail program 0832, C-rail,
Console, ProShell
MV0800-0015a-EN
www.conductix.com
translated document
Page 23 of 23
6.4.2
Repair kit
If the positioning band has been damaged (e.g. by falling parts), a repair kit can be downloaded from the Internet or ordered as a 1
m replacement section (available from
: Starting page
Products
Measurement sensors
Sensors for positioning
Barcode positioning systems
BPS 34/37
Heading "
"). These files contain all the code label information for a posi-
tioning band from length 0...500 m to 9500 m...9999 m.
1 m of positioning band is shown on each DIN A4 page. This meter of band is divided into 5 lines of 20 cm each with 5 code labels
of 4 cm each.
Steps to replace the defective area:
1.
Determine the coding of the defective area.
2.
Print the replacement range.
3.
Stick the printed area over the defective area.
Conductix-Wampfler GmbH
Rheinstrasse 27 + 33
79576 Weil am Rhein – Märkt
Germany
Phone: +49 (0) 7621 662-0
Fax:
+49 (0) 7621 662-144
[email protected]
www.conductix.com
