144 - RedBoot Procedures
DeviceMaster PNIO | UP User Guide
: 2000639 Rev. A
RedBoot Procedures
Resetting the DeviceMaster
When you have completed your tasks in RedBoot, you must enter a
reset
command
at the
RedBoot
> prompt for the DeviceMaster to begin operation.
Note:
on the DeviceMaster will go through the power up sequence. The
DeviceMaster has completed its reset cycle when the
Status
LED is lit and it
stops flashing.
Configuring Passwords
This section discusses how to configure a password for the web and telnet server.
Use the following procedure to establish the DeviceMaster password for the Web
and telnet server. Establishing a password prevents unauthorized changes to the
DeviceMaster configuration.
1.
Establish communications with the DeviceMaster using the serial (Page 140)
or telnet method (Page 141).
2.
Type
password
[
your_password
] and press
Enter
.
Note:
If you forget your password, you can reprogram the password using the
serial method which bypasses the password.
Note:
The Bootloader version on your DeviceMaster may be different than the
version displayed in this graphic.
See the
auth
command in the
on Page 145, if you
want to set up Web browser authentication.
RedBoot> dis
Loading disabled
RedBoot>
reset