Traffic Class Name
Enter name for traffic class
Assign ATM Transmit Priority
Select Low, Medium or High.
Mark IP Precedence
Select between 0-7. The lower the digit
shows the higher the priority
Mark IP Type Of Service
Select either: Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput,
Minimize Delay
Mark 802.1p if 802.1q is enabled
on WAN
Select between 0-7. The lower the number
the higher the priority
SET-1
Physical LAN Port
Select between ENET and USB.
Protocol
TCP, TCP/UDP, UDP or ICMP.
Source IP Address
Enter the source IP address.
Source Subnet Mask
Enter the subnet mask for the source IP
address.
UDP/TCP Source Port (port or
port:port)
Enter source port number or range.
Destination IP address
Enter destination IP address.
Destination Subnet Mask
Enter destination subnet mask.
UDP/TCP Destination port (port or
port:port)
Enter destination port number or range.
SET-2
802.1p Priority
Select between 0-7. The lower the digit
shows the higher the priority
58
Summary of Contents for CT-5611E
Page 1: ...CT 5611E ADSL2 Combo Router for Annex B User Manual Version A1 0 June 2 2008 261070 009...
Page 14: ...13...
Page 41: ...40...
