Comtrend Corporation CT-5611E User Manual Download Page 60

Page: 60 / 82

6.6 Routing

This option allows for

Default Gateway

and

Static Route

configuration.

NOTE:

In Bridge mode, these options are shown but have no effect.

6.6.1 Default

Gateway

If the

Enable Automatic Assigned Default Gateway

checkbox is selected, this

device will accept the first received default gateway assignment from one of the
enabled PVC(s). If the checkbox is not selected, enter the static default gateway
and/or WAN interface. Click

Save/Apply

button to save it.

NOTE:

After enabling the Automatic Assigned Default Gateway, the device

must be rebooted to activate the assigned default gateway.

6.6.2 Static

Route

The Static Route screen lists the configured static routes.
Click the

Add

Remove

buttons to change settings.

Summary of Contents for CT-5611E



















































































Search results

Summary of Contents for CT-5611E

Reviews:

Related manuals for CT-5611E

Brands by name

Popular brands

Comtrend Corporation CT-5611E, User Manual

Search results

Summary of Contents for CT-5611E

Reviews:

Related manuals for CT-5611E

Brands by name

Popular brands