8.4 Access Control
The Access Control option under the Management menu bar configures access
related parameters in three areas: Services, IP Addresses, and Passwords. Use
Access Control to control local and remote management settings for the device.
NOTE:
The WAN column is present if the WAN interface is active. Only the LAN
side will be displayed if the WAN interface is down.
8.4.1 Services
The Services option limits or opens the access services over the LAN or WAN.
These access services are available: FTP, HTTP, ICMP, TELNET and TFTP.
Enable a service by ticking its checkbox then click
Save/Apply
to activate.
8.4.2 IP
Addresses
The IP Addresses option limits local access by IP address. When
Access Control
Mode
is enabled, only the IP addresses listed here can access the device. Before
enabling
Access Control Mode
, add IP addresses with the
Add
button.
71
Summary of Contents for CT-5611E
Page 1: ...CT 5611E ADSL2 Combo Router for Annex B User Manual Version A1 0 June 2 2008 261070 009...
Page 14: ...13...
Page 41: ...40...
