LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
MN-LPOD
Ethernet Interface Operation
Revision 14
4–2
•
The User PC is running a terminal emulation program for operation of the
LPOD Telnet Interface.
•
The User PC is running a compatible web browser for operation of the
LPOD HTTP Interface.
•
The User PC is connected to the LPOD 19-pin ‘
J6 | COM1’
port. You may
connect the User PC Ethernet port to the LPOD with the available
CA-0000352 Ethernet Interface Cable (part of CEFD Kit KT-0000203).
•
You have recorded the LPOD’s Management IP Address.
4.2
SNMP Interface
SNMP is an Internet-standard protocol for managing devices over IP networks. An
SNMP-managed network has three key components:
•
The managed device. This includes the LPOD.
•
The SNMP Agent. This software runs on the LPOD. The LPOD SNMP Agent
supports both SNMPv1 and SNMPv2c.
•
The user-supplied Network Management System (NMS). This software
runs on the User PC.
4.2.1
Management Information Base (MIB) Files
An MIB file is used for SNMP remote management of a unique device, and
consist of a tree of nodes called Object Identifiers (OIDs). Each OID provides
remote management of a particular function. These MIB files should be compiled
in a user-supplied MIB Browser or SNMP Network Monitoring System server.
In these LPOD MIB file names, the letter x represents the revision of the file.
4.2.1.1
ComtechEFData Root MIB file
•
FW-0000291x.mib
•
ComtechEFData MIB file gives the root tree for all Comtech EF Data LPOD
products (PSx) and consists of only the following OID:
o
Name: comtechEFData
o
Type: MODULE-IDENTITY
o
OID: 1.3.6.1.4.1.6247
o
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFD
ata(6247) Module: ComtechEFData
