LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
MN-LPOD
Appendix B
Revision 14
B-2
B.2
Control and Data Cables
App B
FIG
CEFD
CABLE
P/N
DESCRIPTION
USED FOR:
REF App A FIG
B-1
CA-
0020526
Serial Interface Cable
(19-pin circular connector to RJ-11)
Connecting 1:1 Redundant Loop Cable ‘
J1
’ receptacle or Standalone LPOD
‘J6
| COM1’
receptacle to CLC-10 RJ-11 communications jack
(Cable and CLC-10 are furnished as part of optional CEFD KIT KT-0020518 )
A-1, A-3, A-12
through A-30
B-2
CA-
0000352
Ethernet Interface Cable
(19-pin circular connector to <2X> RJ-45)
Connecting 1:1 Redundant Loop Cable ‘
J1
’ receptacle or Standalone LPOD
‘J6
| COM1’
receptacle to LPOD
net
Ethernet jack
(Cable and LPODnet are furnished as part of optional CEFD KIT KT-0000203 )
A-2, A-3, A-12
through A-30
B-3
CA-
0000318
100’ COMMS Cable
(19-pin circular connector to bare end)
Connecting 1:1 Redundant Loop Cable ‘
J1
’ receptacle or Standalone LPOD
‘J6
| COM1’
receptacle to user-specified M&C interface
A-3, A-12
through A-30
B-4
CA-
0000543
250’ COMMS Cable
(19-pin circular connector to bare end)
A-3, A-12
through A-30
B-5
CA-
0020655
Rx / Tx Redundant Loop Cable
(19-pin circular receptacle to <2X> Type
‘N’ connectors, <2X> 19-pin circular
connectors)
Interconnecting 1:1 Redundancy System LPOD units, Rx / Tx switches, and
user M&C interface
A-3, A-12
through A-30
B-6
CA-
0020657
Tx-only Redundant Loop Cable
(19-pin circular receptacle to <1X> Type
‘N’ connector, <2X> 19-pin circular
connectors)
Interconnecting 1:1 Redundancy System LPOD units, Tx switch, and user
M&C interface
A-3, A-12
through A-30
