LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
MN-LPOD
System Connectors, Installation, and Startup
Revision 14
2–7
2.3.4
Connector ‘J3 | POWER IN’ DC Power Mains
WARNING!
FOR SAFETY REASONS, MAKE SURE YOU KNOW THAT THE ‘J3 |
POWER IN’ DC POWER CONNECTION PIN ASSIGNMENTS ARE
DIFFERENT FOR EACH LPOD UNIT. YOU MUST USE THE CORRECT PIN
ASSIGNMENTS.
INCORRECT USE OF PIN ASSIGNMENTS CAN RESULT IN PRODUCT
DAMAGE OR PERSONAL INJURY.
For all LPOD models, the prime power input requirement is 38-72V DC. The total
power required from the prime power supply depends on the model used. See
Sect. 1.5 Summary of Specifications
for more information.
2.3.4.1
LPOD PS 1 ‘J3 | POWER IN’ DC Power Main
The mating connector specification and the pin assignments (
Table
2-4
) specific to the LPOD PS 1 DC power interface are as follows:
Mating Connector:
CEFD P/N CN/STPG04F01 (Glenair IPT06E-12-4-SSR-F7)
Table 2-4. LPOD PS 1 ‘J3 | POWER IN’ Pin Assignments
Pin
LPOD PS 1 Assignment
A
V+
B
GND
C
V-
D
NO CONNECT
