Comtech EF Data CDM-710G, Installation And Operation Manual

Page: 147 / 246

8–1
Chapter 8. SNMP INTERFACE
8.1 SNMP Interface
The Simple Network Management Protocol (SNMP) is an application-layer protocol designed to
facilitate the exchange of management information between network devices. The CDM-710G
SNMP agent supports both SNMPv1 and v2c.
IMPORTANT
For proper SNMP operation, the CDM-710G MIB files must be used with the
associated version of the CDM-710G modem M&C Software. Refer to the
CDM-710G SW Release Notes for information on the required FW/SW
compatibility.
8.2 Management Information Base (MIB) Files
MIB files are used for SNMP remote management and consist of Object Identifiers (OIDs). Each
OID is a node that provides remote management of a particular function. A MIB file is a tree of
nodes that is unique to a particular device.
There are three MIB files associated with the CDM-710G:
MIB File/Name Description
Fw10874-2-.mib
ComtechEFData MIB file
ComtechEFData MIB file gives the root tree for ALL Comtech EF Data
products and consists of only the following OID:
Name: comtechEFData
Type: MODULE-IDENTITY
OID: 1.3.6.1.4.1.6247
Full path:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtechEFData(6247)
Module: ComtechEFData
Fw0000116-.mib
CDM-710G Common MIB file
CDM-710G High Speed modem family common components.
Fw0000117-.mib
CDM-710G Traps MIB file CDM-710G High Speed modem family Trap MIB file is provided for
SNMPv1 traps
These MIB files should be compiled in a MIB Browser or SNMP Network Monitoring System
server.
Note: The CDM-710G SNMP agent supports both SNMPv1 and v2c. The CDM-710G/ 710GL
Traps file only needs to be compiled if SNMPv1 traps are to be used.