CDM-710G High-Speed Satellite Modem
Revision 1
Front Panel Operation
MN-CDM710G
6–53
6.3.6.6
(SELECT:) UTIL
Æ
FAST
FAST: Cnfg View
MainBoard S/N: 333333333
Comtech EF Data’s FAST (Fully Accessible System Topology) system permits the purchase and
installation of options through special authorization codes, entered remotely or through the front
panel. FAST allows immediate implementation of different options through the user interface keypad.
All FAST options are available through the basic platform unit.
Select either
Cnfg
or
View
using the
W
X
arrow keys, then press
ENTER
.
(UTIL:) FAST
Æ
Cnfg (Configuration)
FAST Configuration
Edit Code Demo Mode
Select
Edit Code
or
Demo Mode
using the
W
X
arrow keys, then press
ENTER
.
If
FAST Configuration:
Æ
Edit Code
is selected:
Edit 20 digit FAST Code:
00000000000000000000 ENT
Enter the code
carefully
on the bottom line by using the
W
X
arrow keys to move to each character
position, then editing the character in that position by using the
ST
arrow keys. Once the 20-digit
FAST Code has been correctly edited into place, press
ENTER
. The CDM-710G will respond with
“
Configured Successfully
” if the new FAST option has been accepted:
If
FAST Configuration:
Æ
Demo Mode
is selected:
FAST Demo Mode: Off On
3888000 seconds remain
The
Demo Mode
enables all FAST options for a limited time. For newer units with the latest
firmware version, the
Demo Mode
lasts 45 days.
Select
Off
or
On
using the
W
X
arrow keys, then press
ENTER
. The display indicates the time
remaining on the demo counter. The demo time may be paused either by turning demo mode off, or
by unplugging the unit. However, whenever the unit is turned back on, the demo counter will resume.
(UTIL:) FAST
Æ
View
View Options: 01 (
)
IF Modulator Installed
Scroll through the available option numbers by using the
ST
arrow keys. The description of
each option and its installation status (
Installed
or
Not
Installed
) appears on the lower line of
the display.
Summary of Contents for CDM-710G
