Comtech EF Data CDM-625A, Installation And Operation Manual

Page: 746 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Appendix T Revision 4
T–6
T.4.1 RADIUS Operation Using the CDM-625A Front Panel
Figure T-2. CDM-625A Front Panel Keypad and Vacuum Fluorescent Display
Chapter 6. FRONT PANEL OPERATION
•
Access to and operation of the CDM-625A Front Panel is not controlled by
RADIUS.
•
Control of RADIUS operations from the front panel is limited only to enabling
and disabling the feature.
• Configuration of RADIUS features is possible only using Telnet remote
commands or the HTTP (Web Server) Interface Admin | Access page.
From the front panel main ( SELECT: ) menu, use the ◄ ► arrow keys to select the Configuration
menu branch, and then press
ENTER
. From the
CONFIG:
menu branch, use the ◄ ► arrow keys
to select the IP submenu, and then press ENTER . From the IP Config: submenu, use the arrow
keys to select Setup , and then press ENTER . From the IP Setup submenu, use the
◄ ►
arrow
keys to select Rad .
SELECT: C onfiguration Test Monitor
Info Store/Ld Utility ODU FAST (

)
CONFIG: All Mode Tx Rx Clocks D&I/ACM
CnC EDMAC Misc Mask Remote
I P (

)
IP Config: Addresses SNMP S etup
ANT AccessList PktP-Enable (

)
IP Setup: Mode WAN PerPortCnfg DDMgmtPt
MAC-Lrng
R ad VLAN QoS Stats FrmSize (

)
RADIUS: Disabled ( E nabled, Disabled)
(

)
Use the ▲▼ arrow keys to select RADIUS operation as
Enabled
, and then press
ENTER
.