Comtech EF Data CDM-625A, Installation And Operation Manual

Page: 123 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
FAST Activation Procedure Revision 4
5–5
2)
View the currently installed FAST features: Use the ‘
Admin | FAST
’ page (
Figure 5-1
) to view
the currently installed features. Any options that appear in the scrollable Options – Not
Installed list box may be purchased as a FAST upgrade.
3) Contact Comtech EF Data Product Support to order features:
A. Provide the unit Serial Number to the Product Support representative.
B. Identify and purchase the desired FAST option(s).
C. Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and the FAST
option activation instructions.
When a FAST Access Code is obtained from Comtech EF Data, it will be for a
specific option register . The FAST options are linked to two option registers:
•
Register1 is for Data Rate, L-Band, and Framing options.
•
Register2 is for Modulation type and Packet Processor options.
4) Activate your purchased FAST features.
A.
In the FAST code section of the ‘
Admin | FAST
’ page,
carefully
enter the register-specific
20-character FAST Access Code into its designated text box ( Register 1 or Register 2 )
(each FAST Access Code is submitted separately). Click [ Submit] .
B. The message “ Configured Successfully ” appears at the top of the FAST code section if
the FAST upgrade is accepted; the modem then resets to its newly-incorporated default
configuration.
However, if an invalid code is entered, either of the following messages may appear
instead:
Repeat the FAST Access Code entry procedure. Should the code entry error persist,
contact Comtech EF Data Product Support for further assistance.