Comtech EF Data CDM-625A, Installation And Operation Manual

Page: 515 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 4
10–45
10.4.2.4.2.2 ODU | Config (KST-2000A/B)
Figure 10-10 shows the ‘ ODU | Config ’ page as it appears when you configure the Comtech EF
Data
KST-2000A/B
as the ODU. Use this page to configure the primary ODU’s Transmit and
Receive Parameters.
Figure 10-10. ODU | Config page (KST-2000A/B)
Up Converter
•
Frequency – Enter a value in MHz.
•
Attenuation – Enter a value in dB.
•
Output – From the drop-down list, select On or Off.
Down Converter
• Frequency – Enter a value in MHz.
• Attenuation – Enter a value in dB.
•
Rx Band (For KST-2000B Only) – From the drop-down list, select band A (10950 to 11700
MHz) , band B (11700 to 12200 MHz) , or band C (12250 to 12750 MHz) .
HPA
• HPA Power Enable – From the drop-down list, select On or Off.
• HPA Fault Logic – From the drop-down list, select Summary or No Summary.